Paquete de bloques secos de ISIS -100 a 40 oC
Please note: ISO17025 Calibration Certificate of Labcal Plus Instrument and one sensor together at 5 equal points across the temperature range of the sensor. If not specified above, the 5 points default will be -90, -50, -25, 0, 30 °C.
ISIS -100 to 40°C Dry Block Bundle is comprised of the following items:
• ISIS dry block -100°C (200/240V)
• Labcal-PRO Precision Thermometer
• Semi Standard Pt100 -100°C to 450°C
• 5 point ISO17025 Calibration Certificate
Includes Standard Insert and Insulating Plug, Serial Communications, Cal NotePad Software and Traceable Certificate (block only).
Standard Insert A and Insulating Plug - 1x9.5mm, 1x8mm, 2x6.4mm, 2x4.5mm x 157mm deep.
ISIS dry block -100°C (200/240V)
The Isis Dry Block offers operation to temperatures as low as -100°C, and is the only block bath working to such a low temperature. Now it is possible to calibrate temperature sensors such as PRTs, Thermocouples and Thermistors at ultra-low temperatures without the need for a liquid bath.
Portability and Safety
Unlike a liquid bath the Isis requires no costly, or hazardous fluids and offers greater portability. This will be of particular value to calibration engineers working on site with low temperature freezers as encountered in pharmaceutical, aeronautical and food environments.
The minimum operating temperature is less than stirred liquid laboratory calibration baths and users in laboratories will also benefit by avoiding the ongoing need for expensive fluids.
The maximum operating temperature is 40°C, a little higher than the minimum operating temperature of Isotech Hot Blocks. This permits covering the range from -100°C to 650°C or higher with just two Isotech blocks.
By limiting the maximum temperature the reliability and operating life of the cooling engine is maximised, and has been agreed in consultation with the licensee of the cooling technology.
-100°C to +40°C
Approximate Time to temperature from ambient
-20°C - 20 minutes, -40°C - 30 minutes, -60°C - 40 minutes, -80°C - 60 minutes, -100°C - 90 minutes.
At 0°C ±0.03°C (30 minutes), At -90°C ±0.02°C (30 minutes).
Radial Homogeneity (similar pockets)
Vertical gradients (over bottom 40mm)
0 to 0.1°C, -90°C to 0.2°C
35mm diameter x 160mm deep (excludes Insulating Cap)
6 thermometer wells as standard (9.5mm, 8.0mm, 6.4mm, 6.4mm, 4.5mm and 4.5mm all 157mm deep)
215mm(W) x 420mm (D), x 640mm (H)
Labcal-PRO Precision Thermometer
The Labcal PRO from Labfacility is fully characterised for Pt100 sensors and all major thermocouples J,K,N,T,E,R,S and B. Exceptionally stable automatic cold junction compensation with a rejection of 100:1 is incorporated for thermocouple ranges. Alternatively, external or manual referencing can be selected as required.
Displayed values and user information are indicated on a bright clear OLED screen with diffused backlighting. Data can be displayed in °C, °F, K, Ω or mV as required; nine front panel push keys, the only user controls, are used in conjunction with the display screen. It is this arrangement which makes for very simple and 'friendly' operation.
Resolution is a user selectable 0.001 or 0.01°C for Pt100 sensors and 0.1°C for thermocouples. All computations are performed digitally without drift. Overall stability is optimised by utilising only the highest quality components including high precision, expensive metal film resistor networks.
There are four input ports, two for thermocouples and two for 3 or 4 wire Pt100 sensors; the instrument automatically recognises 3 or 4 wire configurations.
The Labcal PRO can accept two Pt100 sensors and/or two thermocouples of similar or different types (J,K,N,T,E,R,S and B). The measured temperature can be displayed directly from one of the inputs or differentially between similar or different inputs. Differential temperature and the two individual channel temperatures are displayed simultaneously.
Individual calibrated sensors can have up to 10 appropriate calibration values programmed into the Labcal PRO. The instrument then digitally self-calibrates to the associated probe over the range embraced in the calibrated values used; the temperature readout is 'corrected' accordingly.
Rechargeable Lithium Ion battery/mains powered
High accuracy ± 0.01°C Pt100, ± 0.18°C thermocouple
25 milliKelvin (0.025°C) system accuracy with Pt100
Simple, fast digital matching to calibrated sensors, up to 10 points per channel retained in memory
Use selectable resolution 0.001/0.01°C for Pt100 inputs
Smart sensor capability Pt100 for corrections stored in probe
Measures Pt100 and thermocouple types J, K, T, E, R, S, B, and N
Readout directly in °C, °F, K, Ω or mV
Four sensor input ports
Channel A, B or A-B reading including dissimilar sensor types
USB serial communications
USB flash drive port
Supplied with PC software
Programmable analogue (re-transmission) output
Semi Standard Pt100 -100°C to 450°C
The 935-14-116 Semi-Standard probe, using a handmade coil wound platinum sensing element is of the highest quality to give high accuracy and low drift
Ideal for field and laboratory use, this Platinum Resistance Thermometer Probe has been specially selected as a working standard suitable for use with the ISIS Dry Block and Labcal-Pro Precision Thermometer
Calibration between -100 and 40°C will need to be specified as shown below.
100Ω ± 0.05Ω
0.003850 ± 0.000005
Self Heating at 1mA
Max. Handle Temperature
ISO17025 Calibration Certificate
ISO17025 Calibration Certificate of instrument and one sensor together at 5 points across the range.
Calibration is in this case is limited to the Dryblock Calibrator supplied & must fall between -100 to + 40 °C to meet the published accuracy of the Instrument.
The x5 Calibration points are to be advised at order placement & must include 0°C as one of the x5 points ( If not specified 5 points then default will be -90, -50, -25, 0, 30 °C. )
Labcal PRO - Laboratory Standard - Precision Digital Thermometer / Logger
The all new, Labcal PRO from Labfacility is fully characterised for Pt100 sensors and all major thermocouples J,K,N,T,E,R,S and B. Exceptionally stable automatic cold junction compensation with a rejection of 100:1 is incorporated for thermocouple ranges. Alternatively, external or manual referencing can be selected as required.